- Tamaño de 5 mm de LED de orificio de paso de IR -

- IR LED de IR a través de los agujeros Radiant -

*Los colores en la foto fueron tomados por cámara, por favor tome el color de emisión real de serie.

- Parámetro LED IR de IR de hoyo -

Calificaciones máximas absolutas en TA = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	220mw
Pulse Forward Current	IFP	1000mA
Forward Current	IF	150mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Características ópticas y eléctricas ( T C = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.2	1.3	1.6	V	IF=50mA
		1.4	1.6	1.8	V	IF=100mA
			2.0		V	IF=1000mA
Rediant Intensitye	Ee		8	12	mw/sr	IF= 50mA
		17		25	mw/sr	IF=100mA
			210		mw/sr	IF=1000mA
Luminous Power	PO		19		mw	IF=50mA
			32		mw	IF=100mA
			320		mw	IF=1000mA
Peak Wavelength	λP	890	900		nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Conexión de alambre dorado -

* Para mantener cada una de las largas esperanzas de LED, mejorada de fábrica, use alambre de oro puro alto para la conexión del circuito interior